Hydraulic hoses, Fittings & Accessories

hydraulic hoses

Hydraulic hoses are used to transmit hydraulic fluid between hydraulic components such as pumps, valves, cylinders, and motors in a hydraulic system. Hydraulic hoses are flexible, reinforced hoses that are designed to withstand the high-pressure and high-temperature conditions that are present in hydraulic systems.

PTFE Hoses

PTFE hoses are used in applications such as transferring acids, solvents, and petroleum products to or from storage containers in industrial plants and are also used for spraying pesticides, fertilizers, and paint.

Steel hydraulic lines

Steel hydraulic lines are good for piping systems and high performance, and are used throughout various markets, including agriculture, construction and mining, diesel engine, injection molding, locomotive, marine, material handling, municipality and oil and gas.

fittings for Air conditioning hoses

Air hose fittings are used to support air-conditioning applications in air hose, such as air hose fittings, air hose fittings for air-conditioning applications, are designed to use air hose in a wide range of settings.

Air conditioning hoses

Air conditioning hose is used for automotive or domestic air conditioning system. It is a textile-reinforced rubber hose with a thick inner liner.

metric thread adaptors

Hydraulic metric thread adaptors are commonly used in hydraulic and pneumatic systems, as well as in industrial applications where leak prevention is critical. Metric can supply a wide variety of hydraulic adapters and reducers.

banjo fittings

A banjo fitting is a hydraulic fitting consisting of a perforated hollow bolt, or internally relieved bolt, and a spherical union for fluid transfer. It is typically used to connect a fluid line to a rigid, internally threaded hydraulic component.

hydraulic BSP adaptors

British Standard Pipe (BSP)Also referred to as Whitworth threads, the BSP thread type fittings seal using metal to metal angled surfaces or a combination of metal to metal and an O-ring. The angle of the sealing surfaces is 60° for both forms. These items ensure the absence of leakages (also under the presence of gases), good resistance to high tightening, and easiness of assembly with the possibility to make repeated assemblies and disassembly. Suitable for high pressures.

hydraulic JIC adaptors

Most commonly used as hydraulic fittings in the fluid power industry, JIC (Joint Industry Council) fittings & Adaptors are a type of flare fitting machined with straight threads using a 37° flare seating surface. This is used to form the seal of the fitting instead of an O-ring or tapered threads.

hydraulic Hose fittings

Fittings help you adapt hoses to your hydrostatic system, allowing you to extend a hose range and attach them to different hydraulic pumping and actuation components. They can also have different shapes, such as straight fittings, elbows, tees, or cross fittings. These allow pipes and hoses to be joined at different angles and configurations. It is important to select the right type of hydraulic fitting for each application to ensure a secure and durable connection.

hydraulic flange fittings

Hydraulic flange connections are used in the most demanding applications, as they are well suited for high pressure, shock and vibration, especially in larger sizes. Flanges allow easy connection between hose and tube/pipe where flexibility is needed, without adding adapters.

hydraulic flange clamp

The split clamps make it easy to assemble the connection in close quarters. They also make removal of the flange head component, such as a hose assembly, easy by loosening all four bolts and removing one clamp half. It is made up of two interlocking pieces that fit securely together using nuts and bolts or welding it into place. Because it is made of two parts, split flanges are used to reinforce weakened areas of piping, or to add an attachment in places conventional flanges cannot.

spiral hose guard

The Spiral Hose Guard wrapping range is made to protect all types of hydraulic and pneumatic hoses. This cover protects against shocks, abrasion and deteriorations, helping to reduce equipment downtime whilst being cost effective and keeping maintenance costs to a minimum.

spring guard

This Spring Guard may be used to enclose industrial hydraulic hoses, reducing stress, wear and tear. Prolong the life of the pipes, tubing and hose assemblies. Abrasion resistant: Protect exposed pipes, lines and tubes from gravel, rocks and debris.

chicago couplings

Chicago-style universal hose couplings are used for air and water applications. Universal couplings are sealed by pressing together and twisting a quarter turn.

whip check

Whip-Check is a safety cable used mainly during an abrasive blasting process. Whip-checks connect hoses across a high pressure coupling to prevent the hoses from whipping around is the connection fails. They are designed as a fail safe to keep pressurized hoses in one place should any inadvertent decoupling occur.

Hydraulic Pipe Clamps

Pipe clamps or pipe hangers are used in industrial hydraulic systems, Hydraulic pipe clamps absorb shock, dampen vibration and reduce noise in hydraulic piping systems.

hydraulic quick release couplings

Quick release couplings are fitting are used to mate fluid lines with system equipment that requires frequent connecting and disconnecting. They are used in both pneumatic and hydraulic applications to build or discontinue the connection of a fluid pipeline.

Hydraulic flat faced Quick release Coupling

Flat Face Couplings are state-of-the-art solutions for high residual pressure. They address residual pressure in a circuit anywhere thermal expansion of trapped fluid causes pressure to develop, and connect by hand with residual pressure, without releasing any fluid into the environment.

Needle ball valves

Needle valves are commonly used to control flow and protect delicate gauges from damage caused by sudden pressure surges of liquids and gases.

hydraulic ball valves

High-Pressure Ball Valves are tools used to control fluid in piping systems and flanges working with the same pressure load or flange connection. These valves have a handle for controlling the fluid flow either for full open or full close flow.The valves' fluid flow is closed when the ball’s holes are at 90-degrees and open when the ball is working with the flow. They have a working pressure of a maximum of 700 Bar and are made of steel and stainless steel elements.

hydraulic flow control valve

flow control valve is to regulate the flow rate in a specific portion of a hydraulic circuit. In hydraulic systems, they're used to control the flow rate to motors and cylinders, thereby regulating the speed of those components. The energy transfer must be equal to the total work done.

solenoid coils

Solenoid coils are an integral part of modern hydraulic valve systems and perform crucial functions. The main task of the coils is maximum precise control and regulation of the fluid flow. In actuation systems for switching valves, the solenoid coil is used to generate an electromagnetic field.The magnetic field acts on the armature and the plunger of the valve. This causes the valve spool to move against the action of the return spring. The result of this movement is a change in the direction of flow of the medium. As soon as the electric current flowing through the solenoid coil is switched off, the valve automatically returns to its initial position. This is ensured by the force of the return spring.

Hydraulic Solenoid Valve

A hydraulic solenoid valve is a solenoid controlled directional valve used in a hydraulic system for opening, closing or changing the direction of flow of the liquid. The valve operates with a solenoid, which is an electric coil wound around a ferromagnetic core at its center.

Hydraulic manifold steel blocks

The manifold is connected to the levers in the operator's cabin, which the operator uses to achieve the desired behavior. it lets the operator control how much fluid flows between components of a hydraulic machinery.

Industrial hydraulic manifold blocks

A hydraulic manifold is a component that regulates fluid flow between pumps and actuators and other components in a hydraulic system. It is like a switchboard in an electrical circuit because it lets the operator control how much fluid flows between which components of a hydraulic machinery.

hydraulic manifold block assembly

The Manifold Block Assembly provides a control point. It is equipped with four low pressure outlets and a check valve. Hydraulic Manifold Blocks are also called Hydraulic Valve Blocks, and they are machine parts that act as junctions between components in a Hydraulic System to regulate fluid flow. Some of the elements that utilize these blocks include pumps and actuators.